Resources

Design Tips for FDM 3D Printing

A few design choices make parts stronger, more accurate and often cheaper to print.

Walls and features

  • Use walls of at least 1.2 mm (about three lines with a 0.4 mm nozzle) for sturdy parts.
  • Keep small pins and posts at least 2–3 mm thick so they don't snap.
  • Add fillets to inside corners to spread stress.

Overhangs and supports

  • Overhangs steeper than about 45° need supports; chamfers instead of flat ledges often avoid them.
  • Supports are included automatically in our instant quotes, but they leave marks — design so they land on hidden faces.

Fit and holes

  • Typical tolerances are about ±0.2 mm, so leave roughly 0.2–0.3 mm clearance between mating parts.
  • Holes print slightly small; size them up a little or plan to drill or ream.
  • For threads that are assembled repeatedly, design for heat-set threaded inserts (available as an option in the instant quote).

Orientation and strength

  • FDM parts are strongest along their layers. Orient so loads don't pull layers apart.
  • Our quote engine automatically picks a print orientation; mention any critical faces in a custom quote request.

Size

  • Maximum build volume is 350 × 320 × 325 mm. Larger parts can often be split into pieces and joined — ask us.
  • Infill (20% by default) controls weight and cost; most functional parts don't need solid infill.

More guides: PLA vs PETG vs TPU · Preparing Your File for a 3D Printing Quote · All resources

Get an Instant Quote Request a Custom Quote